Vehicle without stability control
skidding off its intended route.
A
B Vehicle with stability control
maintaining control on a slippery
surface.
SWITCHING STABILITY
CONTROL ON AND OFF
Stability Control turns on each time you
switch the ignition on.
You can switch the stability control off by
pressing and holding the stability and
traction control button off for 5-15
seconds, or you can press the button again
to switch the system on.
Shifting the transmission into reverse (R)
will disable the system.
You can switch the traction control system
off or on independently. See Switching
Traction Control On and Off (page 229).
232
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Stability Control
To Next Page
Loading...
