Ford RANGER 2024 - Stability Control Indicator

Stability Control and Traction Control with Roll Stability Control
Traction Control
System
3
Electronic
Stability
Control
3
Roll Stability
Control
3
Stability Control
OFF Light
Enabled
Enabled
3
EnabledIlluminated
during bulb
check
Default at start-
up
Disabled
1
Enabled
3
EnabledIlluminatedButton pressed
momentarily
Disabled
1
Disabled
2
EnabledIlluminatedButton pressed
and held for 5 -
15 seconds
Disabled
1
DisabledDisabledIlluminatedButton not
pressed and
transfer case is
switched to 4x4
Low or put into
Rock Crawl
Mode
1
The Traction Control system can still be enabled but with tighter or looser thresholds.
2
When you press and hold the button, a progress bar will display to show the button hold
time progress.
3
Functions can vary depending on what selectable drive mode the vehicle is currently in.
STABILITY CONTROL
INDICATOR
E138639
The system turns on each time
you switch the ignition on. You
can switch off the traction
control portion of the system
independently. See How Does Traction
Control Work (page 229).
233
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Stability Control