Objects in the red zone are closest to your
vehicle and objects in the green zone are
farther away. Objects get closer to your
vehicle as they move from the green zone
to the yellow or red zones. Use the side
view mirrors and rear view mirror to get
better coverage on both sides and rear of
your vehicle.
Keep Out Zone
To access the 360 degree
camera, press the camera
button on the touchscreen or
shift into reverse (R).
Note: When you press the camera button,
it defaults to the front 360 camera view.
The other front camera views are accessible
on the touchscreen.
Note: The rear view camera activates when
you shift into reverse (R). Additional views
are then accessible on the touchscreen.
When in park (P), neutral (N) or drive (D),
the front images display when you press
the camera button.
Note: Not all cameras are available.
Note: The 360 degree camera system turns
off when your vehicle is in motion at low
speed, except when in reverse (R).
Switching Additional Views On
and Off (If Equipped)
You can switch additional camera views
on and off via the touchscreen.
Trailer Side View
Trailer side view activates using the turn
signal lever with a trailer attached. It
provides a side view of the vehicle and
trailer for better visibility during lane
changes and turns.
To switch trailer side view on and off:
1. Open the driver assistance menu. See
Center Display (page 507).
2. Switch Trailer Side View on or off.
SWITCHING THE 360 DEGREE
CAMERA VIEW
Normal + 360 degree view
contains the normal camera
view next to a 360 degree
camera view.
253
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
360 Degree Camera (If Equipped)
To Next Page
Loading...
