Ford RANGER 2024 - Setting the Adaptive Cruise Control Gap

E246884
E246885
Press the toggle button up or
down to set the current speed.
Take your foot off the accelerator pedal.
The indicator, current gap setting and set
speed appear in the instrument cluster
display.
E337576
A vehicle image illuminates if there is a
vehicle detected in front of you.
Note: When adaptive cruise control is
active, the speedometer may vary slightly
from the set speed displayed in the
instrument cluster display.
Setting the Adaptive Cruise Speed
from a Complete Stop
E246884
E246885
Press the toggle button up or
down while keeping the brake
pedal fully pressed.
The set speed adjusts to 15 mph when in
imperial units or 20 km/h when in metric
units.
The indicator, current gap setting and set
speed appear in the instrument cluster
display.
Note: The system activates from a
complete stop only when it detects a lead
vehicle in close proximity.
Manually Changing the Set Speed
E246884
Press and release the toggle
button up to increase the set
speed in small increments. Press
and hold the toggle button up to increase
the set speed in large increments. Release
the button when the set speed is equal to
the preferred speed.
E246885
Press and release the toggle
button down to decrease the set
speed in small increments. Press
and hold the toggle button down to
decrease the set speed in large increments.
Release the button when the set speed is
equal to the preferred speed.
You can also press the accelerator or brake
pedal until you reach the speed you prefer.
Press the toggle button up or down to
select the current speed as the set speed.
The system may apply the brakes to slow
the vehicle to the new set speed. The set
speed continuously displays in the
instrument cluster display when the
system is active.
SETTING THE ADAPTIVE
CRUISE CONTROL GAP
Press the button to cycle
through the four gap settings.
267
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Adaptive Cruise Control (If Equipped)