Ford RANGER 2024 - Adjusting the Speed Limit Tolerance; Canceling the Set Speed Limit; Resuming the Set Speed Limit; Intentionally Exceeding the Set Speed Limit

ADJUSTING THE SPEED LIMIT
TOLERANCE
1.
E386797
Press the button on the
touchscreen.
2. Press Driver Assistance.
3. Press Speed Limit Assist.
4. Switch Intelligent Speed Limiter on.
5. Use the slider bar to adjust the
allowable tolerance for the system.
CANCELING THE SET SPEED
LIMIT
E308130
Press to cancel the limiter and
place it in standby mode. The
symbol in instrument cluster
display appears grey.
RESUMING THE SET SPEED
LIMIT
E308130
Press to resume the limiter. The
system sets the speed limit to
the detected maximum speed
limit when it resumes. The symbol in the
instrument cluster display appears green.
INTENTIONALLY EXCEEDING
THE SET SPEED LIMIT
Firmly press the accelerator pedal to
temporarily turn the system off. The
system reactivates once your vehicle speed
drops below the set speed.
INTELLIGENT SPEED LIMITER
INDICATORS
E280228
It illuminates in the instrument
cluster when the system is in
standby or active.
INTELLIGENT SPEED LIMITER
AUDIBLE WARNINGS
A warning appears in the instrument
cluster and a tone sounds if any of the
following occur:
• Your vehicle's speed exceeds the
current set speed.
• The system detects a maximum speed
limit that is lower than your vehicle's
current speed. A tone sounds when
your vehicle speed remains above the
speed limit for 30 seconds.
• You intentionally exceed the set speed.
If the traffic sign recognition system
detects a speed limit outside the
operational speed range, 15–113 mph
(24–182 km/h), a single warning tone
sounds and the system switches to
standby mode.
SWITCHING FROM
INTELLIGENT SPEED LIMITER
TO SPEED LIMITER
1.
E386797
Press the button on the
touchscreen.
2. Press Driver Assistance.
3. Press Speed Limit Assist.
4. Switch Intelligent Speed Limiter off.
288
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Intelligent Speed Limiter (If Equipped)