BLIND SPOT ASSIST (IF EQUIPPED)
WHAT IS BLIND SPOT ASSIST
Blind spot assist is an extension of the lane
keeping system.
It may help you identify adjacent vehicles
during a lane change.
Blind spot assist provides a blind spot
warning and steering assistance to help
you become aware of and steer away from
vehicles in your blind spot during lane
changes.
HOW DOES BLIND SPOT ASSIST
WORK
Activate and deactivate the
system using the lane keeping
system button on the steering
wheel.
During lane changes, the design of the
blind spot assist feature detects vehicles
in, or approaching, your blind spot and
provides a warning, plus steering
assistance to direct your vehicle back into
your lane.
When active, this system functions with or
without the use of turn signals and hazard
flashers.
You must keep your hands on the steering
wheel at all times.
BLIND SPOT ASSIST LIMITATIONS
All system limitations present in the basic
lane keeping system also apply to blind
spot assist.
Blind spot assist does not function under
the following conditions:
• No lane markings are detected.
• One or both rear radar sensors become
blocked or faulty.
• Attaching bike or cargo racks could
cause false alerts due to obstruction
of the sensor.
Blind spot assist may have difficulty
detecting hazards under the following
conditions:
• If a vehicle is approaching in an
adjacent lane at a speed higher than
your vehicle.
• Bad weather obstructing the sensors.
294
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Lane Keeping System
To Next Page
Loading...
