Diagram 1: Vehicle A uses its left turn
signal preparing to change from the right
lane to the middle lane. Vehicle B is already
in the middle lane and just entered Vehicle
A's blind spot causing the blind spot
information system alert indicator to flash
on the exterior mirror.
Diagram 2: The driver of Vehicle A begins
to steer into the center lane not aware of
Vehicle B.
Diagram 3: Blind spot assist counter
steers to help alert the driver of Vehicle A
to direct their vehicle back into the right
lane to help avoid a possible collision with
Vehicle B.
The lane keeping aid warning lamp or
yellow lane marking in your instrument
cluster display indicate blind spot assist
activation. In addition, the blind spot
information system alert indicator flashes
on the exterior mirror on the same side as
the detection. See Blind Spot
Information System (page 301).
Blind Spot Assist Information Messages
ActionMessage
Displays if you attach a trailer to your vehicle with the blind
spot information system switched off or you have not
configured the trailer.
Blind Spot Assist Not
Available Trailer
Attached
Displays if your blind spot information system sensors are
blocked.
Blind Spot Assist Not
Available Side Sensor
Blocked
The system has detected a fault that requires service. Have
your vehicle checked as soon as possible.
Blind Spot Assist System
fault
295
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Lane Keeping System
To Next Page
Loading...
