Ford RANGER 2024 - Pre-Collision Assist - Troubleshooting

Note: Evasive steering assist does not
activate if the distance to the road user
ahead is too small and the system cannot
avoid a crash.
SWITCHING EVASIVE STEERING
ASSIST ON AND OFF
1.
E386797
Press the button on the
touchscreen.
2. Press Driver Assistance.
3. Press Pre-Collision Assist.
4. Switch Evasive Steering on or off.
Note: If you switch automatic emergency
braking off, evasive steering assist turns off.
Note: Automatic emergency braking and
evasive steering assist turn on every time
you switch the power on.
PRE-COLLISION ASSIST –
TROUBLESHOOTING
PRE-COLLISION ASSIST –
WARNING LAMPS
E335612
A telltale illuminates in the
instrument cluster display to
indicate if the system is disabled,
unavailable, or temporarily degraded due
to external environmental conditions.
Note: No action is needed if the telltale
illuminates without a corresponding
information message. See Pre-Collision
Assist Precautions (page 310).
PRE-COLLISION ASSIST – INFORMATION MESSAGES
ActionMessage
You have a blocked sensor due to bad
weather, ice, mud or water in front of the
radar sensor. You can typically clean the
sensor to resolve.
Pre-Collision Assist Not Available Sensor
Blocked
A fault with the system has occurred. Have
your vehicle checked as soon as possible.
Pre-Collision Assist Not Available
316
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Pre-Collision Assist