1. Pull the release button on the cleat to
release the cleat.
2. Move the cleat to desired position.
3. Lock the cleat to the locking positions
on the sliding rails. Locking positions
can be identified as holes on the rails.
Note: The release button returns to the lock
position only when the cleat is locked
correctly.
Note: Do not load the cleat unless it is
properly locked onto the rail.
PICKUP BED ANCHOR POINT
LOAD CAPACITIES
BA
Maximum force
between diagonally
opposed anchor
points 600 lb
(272 kg).
Maximum force
between directly
opposed anchor
points 276 lb
(125 kg).
Note: You could damage the pickup bed
walls if you overload the tie-downs.
Note: Make sure that you properly balance
and secure the cargo load. Failure to do this
can cause cargo instability and damage to
the box.
Note: Do not secure cargo with tie downs
connected from the tie-down brackets to
the pickup box tie-downs. This could cause
the tailgate to detach.
Adjustable Sliding Cleat Tie-Down
Load Capacities
The sliding cleats can be used to secure
loads. The maximum recommended load
is 551 lb (250 kg) per cleat.
329
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Pickup Bed
To Next Page
Loading...
