Selecting the Trailer Brake Type
1. Press Default for trailers with
electromagnetic drum brake systems
or press Electric over Hydraulic for
trailers with electrically actuated
hydraulic brake systems.
2. Press Save.
Selecting the Trailer Brake Effort
1. Select a setting for your trailer.
Note: The default value is Low and is the
recommended setting for most trailers.
Select a different setting if your trailer's
brakes require more initial voltage, or you
prefer more aggressive trailer braking.
2. Press Save.
INTEGRATED TRAILER BRAKE CONTROLLER –
TROUBLESHOOTING
INTEGRATED TRAILER BRAKE CONTROLLER – INFORMATION
MESSAGES
DetailsMessage
The system detects the trailer wiring
connection is disconnected, during a given
ignition cycle.
Trailer Disconnected
The system detects an electrical fault in
the trailer brake circuit. If this message
appears without a trailer attached, see your
authorized dealer. If a trailer is attached,
inspect and repair the trailer wiring.
Trailer Wiring Fault
Displays the current gain setting for the
trailer brake.
Trailer Brake Gain: {trailer gain value:#0.0}
Displays the current gain setting for the
trailer brake when you do not have a trailer
connected and also when you have a trailer
connected with mechanical brakes.
Trailer Brake Gain: {trailer gain value:#0.0}
No Trailer
342
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Integrated Trailer Brake Controller (If Equipped)
To Next Page
Loading...
