1. Lift the release strap.
2. Lower the seat back.
3. Remove the bolt.
4. Lift the jack from the foam block and
remove the jack from your vehicle.
1. Pull the release strap out.
2. Lift the seat bottom up.
3. Use the tether strap to secure the seat
cushion.
4. Locate tool bag and remove the
securing straps.
Removing the Spare Tire
2. Insert the jack handle into the guide
hole. Turn counterclockwise until the
wheel rests on the ground, and there is
slack in the cable.
459
2024 Ranger (TRD) Canada/United States of America, enUSA, Edition date: 202304, DOM
Changing a Road Wheel
To Next Page
Loading...
