Ford RANGER - TOWING A TRAILER; TRAILER SWAY CONTROL

172
*
[GF12600(R)01/96] 3. Put the gearshift in Neutral and wait at least 3 seconds
before shifting into R (Reverse) to prevent a grinding noise.
Do not release the clutch.
*
[GF12700(R)01/96] 4. Push the gearshift all the way to the right and pull it back
into Reverse.
*
[GF12800(R)01/96]
With the 5-speed transmission you can engage R (Reverse) only
by moving the gearshift from the left of 3 (Third) and 4 (Fourth)
gears before you shift into R (Reverse). This is a special lockout
feature that protects you from accidentally shifting into R when
you downshift from 5 (Fifth) gear.
*
[GF12900(R)01/96] 5. Once R (Reverse) is engaged, slowly release the clutch pedal
from the floor.
*
[GF13000(R)01/96]
If R (Reverse) is not engaged, continue to push the clutch pedal
in while you put the gearshift back into Neutral. Then, release
the clutch pedal for a moment and repeat steps 2 through 5.
*
[GF13100(R)01/96]
Upshifting/downshifting
[GF13200(R)03/96]
Upshift and downshift at the speeds that are specified in the
charts.
File:09ungfr.ex
Update:Thu Mar 20 08:55:24 1997