270
[MC22936(R)01/96]
10-1/2 pica
art:0090155-A
Power steering dipstick location
*
[MC22940(R)01/96] 5. If the power steering fluid is low, add fluid in small
amounts, continuously checking the level, until you reach the
FULL HOT range. Do not overfill.
*
[MC22942(R)03/96] 6. When you are finished, put the dipstick back in and make
sure that it fits snugly.
[MC22944(R)05/96]
Use only power steering fluid that meets Ford specification such
as MERCONH Multi-Purpose ATF XT-2-QDX (or equivalent).
*
[MC22946(R)01/96]
If the power steering fluid is low, do not drive your vehicle for
a long period of time before adding fluid. This can damage the
power steering pump.
*
[MC22948(R)03/96]
If you check the power steering fluid when it is cold, make sure
that the fluid reaches the FULL COLD range on the dipstick.
The reading will only be accurate if the fluid temperature is
approximately 50 to 85ËšF (10 to 30ËšC).
*
[MC22950(R)01/96]
NOTE: Do not turn the steering wheel of your vehicle with
the engine off. It could force power steering fluid out
from the reservoir cap or in extreme cases, it could
unseat the cap.
File:11unmcr.ex
Update:Thu Mar 20 08:58:43 1997
To Next Page
Loading...
