Electronic Sound Systems
39
*
[AS29850(R)10/95]
How to change the track being played
[AS29855(R)04/94]
There are two ways to change the track being played. You can
use the “SEEK” or “SCAN” buttons.
[AS29860(R)04/94]
■ Using the “SEEK” function with your CD-Changer
[AS29865(R)10/94]
Press the right (
a
) side of the “SEEK” button to seek
forward to the next track of the current disc. After the last
track has been completed, the CD player automatically
changes to the next disc.
[AS29870(R)04/94]
Press the left (
b
) side of the “SEEK” button to seek to the
previous track on the current disc.
[AS29875(R)04/94]
■ Using the SCAN function with your CD Changer
[AS29880(R)10/94]
Press the “SCAN” button to move forward to the next track.
Approximately an eight-second sampling of the track will be
played before moving to the next track. The display will
indicate the disc and track number (dd-tt). At the end of the
disc, the CD Changer automatically changes to the next disc.
[AS29885(R)04/94]
To end the scan mode, press the “SCAN” button a second
time.
*
[AS29905(R)04/95]
Operating the CD Compression feature
[AS29910(R)04/94]
Because of the wide dynamic range of Ford’s 6-CD Changer
System, soft passages may be difficult to hear under certain
driving conditions while maintaining a reasonable volume level
in the louder passages. The compression feature will bring these
soft and loud passages closer together for a more consistent
listening level.
*
[AS29915(R)01/95]
To turn the compression on, press the “COMPRESS”/#5 button.
When the compression feature is activated, the display will
indicate “C”.
File:04unasr.ex
Update:Thu Mar 20 08:49:21 1997
To Next Page
Loading...
Need help?
General
