Upper (top tether) anchorages - Super
Cab
WARNING
WARNING: child restraint
anchorages are designed to
withstand only those loads imposed
by correctly fitted child restraints. Under
no circumstances are they to be used for
adult seatbelts, harnesses or for attaching
other items or equipment to the vehicle.
There are two child restraint anchor fittings
on the rear panel of the Super Cab, one
behind each rear seating position in the
locations shown.
1. Each anchor fitting is accessed by
removing a plastic cover.
2. Lift up the cover on the back panel trim
with a suitable tool.
The diagram below shows the correct
installation and orientation of the
attaching clip to the anchor fitting.
To Next Page
Loading...
