Voice Command
(phone | Blackberry | iPhone)
Then say any of the following:
call (___)
call ___ at home
call ___ ([at] work | [(in | at) [the]] office)
call ___ on (mobile | cell)
call ___ on other
1
dial [[a] number]
2
([go to] privacy [on] | transfer to
phone | handsfree off)
2
(hold call [on] | place call on hold)
2
join (calls | call)
2
mute call [on]
Voice Command
2
(mute call off | un-mute call)
(turn ringer on | silent mode off)
(turn ringer off | silent mode [on])
3
[text] (messages | message)
help
___ is a dynamic listing, meaning that it
could be the name of anything, such as a
group, artist or song. For example you
could say "Play artist The Beetles".
1
See Dial table below.
2
These commands are only valid while in
a phone call.
3
See the text message table below.
Dial Commands
Press the voice button and when prompted
say any of the following commands:
Action and DescriptionVoice Command
This will add a # symbol to the number or name.Pound
0 (zero) to 9 (nine)Number
This will add a * symbol to the number or name.Asterisk or Star
Deletes all entered digitsclear
Deletes the last set of entered digits.(delete | correct)
This will add a + symbol to the number or name.Plus
Note: To exit dial mode, press and hold the phone button or any button on the audio unit.
Phonebook Hints
To hear how the SYNC system speaks a
name browse phonebook, select a contact
and press:
296
Ranger (), EB3B-19G219-ZAB enAUS
SYNC™ (If Equipped)
To Next Page
Loading...
