Second Level Messages, Actions and DescriptionsMenu Item
Have the system display traffic jam information.
Have the system display closed roads.
Have the system display road work information.
Have the system display incident information.
Have the system display icons for areas where difficult driving
conditions may occur.
Have the system display icons for areas where snow and ice
on the road may occur.
Have the system display any smog information.
Have the system display weather warning information.
Have the system display where there may be reduced visibility.
Have the system display icons to recommend switching on
your radio for traffic announcements.
Avoid Area
Second Level Messages, Actions and DescriptionsMenu Item
Choose areas which you want the system to avoid when
calculating a route for you.
Avoid Areas
Then select any of the following:
Once you make a selection, the system tries to avoid the
area(s) if possible for all routes. To program an entry, press:
Add
To delete a section choose the listing on the screen. The screen
will change, then press:
Delete
Map Mode
Press the green bar in the upper right area
of the touchscreen to view map mode. Map
mode shows advanced viewing comprised
of both 2D city maps as well as 3D
landmarks (when available).
2D city maps show detailed outlines of
buildings, visible land use and land
elements and detailed railway
infrastructure for the most essential cities
around the globe. These maps also contain
features, such as town blocks, building
footprints and railways.
381
Ranger (), EB3B-19G219-ZAB enAUS
SYNC™ 2
To Next Page
Loading...
