ActionMessage
Displays to indicate that the vehicle is still in Transport mode.
This may not allow some features to operate properly. See
your authorized dealer.
Transport Mode Contact
Dealer
Displays to indicate that the vehicle is still in Factory mode.
This may not allow some features to operate properly. See
your authorized dealer.
Factory Mode Contact
Dealer
Informs the driver that the powertrain needs service due to a
powertrain malfunction.
See Manual
Parking Aid
ActionMessage
Displays when the system has detected a condition that
requires service. Contact your authorized dealer. See Front
Parking Aid (page 142).
Check Front Park Aid
Displays when the system has detected a condition that
requires service. Contact your authorized dealer. See Rear
Parking Aid (page 141).
Check Rear Park Aid
Displays the parking aid status.Front Park Aid On Off
Displays the parking aid status.Rear Park Aid On Off
Parking Brake
ActionMessage
Displays when the parking brake is set, the engine is running
and the vehicle is driven more than 5 km/h. If the warning
stays on after the parking brake is released, contact your
authorized dealer.
Park Brake Engaged
The parking brake system has detected a condition that
requires service. See your authorized dealer.
Park Brake Malfunction
Service Now
Displays when the parking brake is not set.Park Brake Not Applied
Apply Park Brake
Displays when the parking brake is set but has not be released.Park Brake Use Switch
to Release
84
Ranger (), EB3B-19G219-ZAB enAUS
Information Displays
To Next Page
Loading...
