Ford S-MAX 2007 - Page 121

Note: If you set a temperature of
greater than 4°C, the temperature
on the other side will be adjusted so
that the difference remains 4°C.
Note: If you set one of the sides to
HI or LO, both sides will be set to HI
or LO.
To switch mono mode back on
To switch mono mode back on,
press the MONO button. MONO
reappears in the display and the
passenger’s side temperature will be
adjusted to the driver’s side
temperature.
Blower
Use the buttons to adjust the blower
speed.
The blower setting is indicated in the
display.
To return to auto mode, press the
AUTO button.
Air distribution
To adjust air distribution, press the
desired button. Any combination of
settings can be selected
simultaneously.
E70308
A B C
FootwellA
Face levelB
WindscreenC
When you select windscreen
defrosting and demisting, A, B and
C switch off automatically and the air
conditioning switches on. Outside air
will flow into the vehicle. You cannot
select recirculated air.
Windscreen defrosting and
demisting
Press the windscreen defrosting and
demisting button. Outside air will flow
into the vehicle. Air conditioning is
automatically selected. As long as the
air distribution is set to this position,
you cannot select recirculated air.
The blower speed and the
temperature control operate
automatically and cannot be adjusted
manually. The blower is set to high
speed and the temperature to HI.
When you select windscreen
defrosting and demisting, the heated
screens switch on automatically and
switch off after a short time.
119
Climate control