EasyManua.ls Logo

Ford S-MAX 2007 - Starting the Engine; General Information; Ignition Switch; Keyless Starting

Ford S-MAX 2007
312 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GENERAL INFORMATION
General points on starting
If the battery has been disconnected
the vehicle may exhibit some unusual
driving characteristics for approx. 8
kilometres (5 miles) after
reconnecting the battery.
This is because the engine
management system must realign
itself with the engine. Any unusual
driving characteristics during this
period may be disregarded.
Starting the engine by
towing or pushing
WARNING
To prevent damage you must
not push or tow start your
vehicle. Use booster cables and a
booster battery. See Using
booster cables (page 239).
IGNITION SWITCH
WARNING
Never return the key to the 0
position when the vehicle is in
motion.
E72128
0 The ignition is off.
I The ignition and all main electrical
circuits are disabled.
Note:
Do not leave the ignition key
in this position for too long to avoid
discharging the battery.
II The ignition is switched on. All
electrical circuits are operational.
Warning lamps and indicators will
come on. This is the key position
when driving. You must also select it
when being towed.
III The starter motor is activated.
Release the key as soon as the
engine starts.
KEYLESS STARTING
WARNINGS
The keyless starting system
may not function if the key is
close to metal objects or electronic
devices such as mobile phones.
Always check that the steering
wheel lock is deactivated before
attempting to move your vehicle.
See Steering wheel lock (page
149).
Note:
A valid passive key must be
located inside the vehicle to switch
the ignition on and start the engine.
Note:
To start your engine you must
also fully depress the brake or clutch
pedal, depending on the transmission
fitted.
147
Starting the engine

Table of Contents

Related product manuals