Pull up the switch once to apply the
EPB.
The brake system warning lamp will
come on to confirm that the EPB is
now applied.
Note:
The brake system warning
lamp will remain on for a short period
if you turn the ignition to position 0 or
remove the key.
Automatic application of the
EPB
The EPB will apply automatically
when you remove the key from the
ignition (depending on country).
WARNING
When you turn the ignition off,
the cluster will remain on for
several minutes. The EPB will only
apply automatically when you
remove the key from the ignition
during this period.
Preventing the automatic
application
WARNINGS
Take care not to leave the
vehicle with the EPB not applied.
Remember that if you press down
the switch while removing the key
from the ignition, the EPB will not be
applied.
Make sure that the vehicle’s
wheels are securely wedged if
you park the vehicle with the EPB
released to prevent it from rolling
away.
Hold the switch pressed while you
switch off the ignition or while you
remove the key from the ignition.
Note:
If you prevented it from
applying while turning off the ignition,
it will remain off when you remove
the key.
162
Brakes
To Next Page
Loading...
