Hold the brake or clutch pedal
depressed and press down the
switch.
The brake system warning lamp will
go off to confirm that the EPB has
been released.
Moving off with a trailer
(vehicles with manual
transmission)
Depending on the gradient and the
weight of the trailer, the vehicle and
trailer may roll backwards slightly
when you move off on a slope. To
prevent this happening, deactivate
the Drive Away Release and release
the EPB manually as follows:
1. Pull up the switch and hold it in this
position.
2. Move off as normal and then
press down the switch when you
notice that the engine has
developed sufficient driving force.
Warning messages in the instrument cluster display
MeaningBrake
system
warning
lamp
EPB
warning
lamp
Text message
The EPB is still applied. Push
down the switch to release the
EPB manually.
FlashingOnRelease park
brake
The EPB is not applied. Pull up
the switch to apply the EPB
manually.
Flashing or
off
On and
warning
chime
Re-apply park
brake
The Drive Away Release function
is temporarily disabled. Release
the EPB manually when moving
off.
OnOn or offFor drive away
use park brake
This indicates a malfunction of
the EPB. The EPB will still operate
but have the system checked by
an expert as soon as possible.
Flashing or
off
On or offPark brake
service required
164
Brakes
To Next Page
Loading...
