1. Fold the seatbacks down. See
Rear seats (page 131).
2. If the retention net is folded, press
the red release button (C) on the
hinges of the upper and lower bar
1 and unfold it.
3. Push the ends of the upper bar
towards each other and insert
them into the retainers on the roof
(A or B). Make sure that the flap
for the centre seat belt is situated
on the right hand side of the
vehicle.
4. Push the bar forwards into the
narrow section of the retainers 2.
191
Load carrying
To Next Page
Loading...
