2. Twist the screwdriver in the
position shown to start separating
the two halves of the remote
control.
3. Twist the screwdriver in the
position shown to separate the
two halves of the remote control.
CAUTION
Do not touch the battery
contacts or the printed circuit
board with the screwdriver.
4. Carefully prise out the battery with
the screwdriver.
5. Install a new battery (3V CR 2032)
with the + facing downwards.
6. Assemble the two halves of the
remote control.
7. Install the key blade.
Remote control without a
folding key blade
1. Insert a screwdriver into the
recess on the back of the key and
remove the key blade.
2. Release the retaining clips with
the screwdriver and separate the
two halves of the remote control.
CAUTION
Do not touch the battery
contacts or the printed circuit
board with the screwdriver.
3. Carefully prise out the battery with
the screwdriver.
4. Install a new battery (3V CR 2032)
with the + facing downwards.
5. Assemble the two halves of the
remote control.
6. Install the key blade.
35
Keys and remote controls
To Next Page
Loading...
