The passive entry system will not
function if:
•
The passive key frequencies are
jammed.
•
The passive key battery is flat.
Note:
If the passive entry system
does not function, you will need to
use the key blade to lock and unlock
your vehicle.
The keyless system allows the driver
to operate the vehicle without the
use of a key or remote control.
Passive locking and unlocking
requires a valid passive key to be
located within one of the three
external detection ranges. These are
located approximately one and a half
metres from the driver and front
passenger door handles and the
luggage compartment lid.
Passive key
The vehicle can be locked and
unlocked with the passive key. The
passive key can also be used as a
remote control. See Locking and
unlocking (page 36).
Locking the vehicle
WARNING
The vehicle does not lock itself
automatically. If no locking
button is pressed, the vehicle will
remain unlocked.
40
Locks
To Next Page
Loading...
