Interior lamp (vehicles without
interior sensors)
1. Carefully prise out the lens using
a flat-bladed screwdriver.
2. Remove the lens.
3. Remove the bulb.
4. Install in the reverse order.
Interior lamp (vehicles with
interior sensors)
1. Carefully prise out the lens using
a flat-bladed screwdriver.
2. Remove the lens.
3. Remove the bulb.
4. Install in the reverse order.
Reading lamp (vehicles
without interior sensors)
1. Carefully prise out the lens using
a flat-bladed screwdriver.
2. Remove the lens.
3. Turn the bulb holder
anti-clockwise and remove it.
4. Install in the reverse order.
73
Lighting
To Next Page
Loading...
