Your vehicle is fitted with either a
dual-zone or triple-zone system.
When the system is in mono mode,
all the temperature zones are linked
to the driver's zone. When you switch
mono mode off, the dual-zone
system allows you to set different
temperatures for the driver's and
passenger's side. On vehicles fitted
with a triple-zone system, you can
set a third temperature for the rear.
The system controls the
temperature, amount and distribution
of the air flow automatically and
adjusts them according to the driving
and weather conditions. Press the
AUTO button to switch auto mode
on.
Note:
Avoid adjusting the settings
when the vehicle interior is extremely
hot or cold. The system adjusts to
the current circumstances
automatically. For the system to
function properly, the side and centre
air vents should be fully open.
Note:
At low outside air
temperatures, when the system is in
auto mode, the air stream will be
directed to the windscreen and the
side windows as long as the engine
is cold.
Note:
For information on the
automatic climate control, on vehicles
fitted with a combined Navigation and
automatic climate control system,
see separate handbook.
Setting the temperature
To Next Page
Loading...
