Seat adjustment controls
See Electric seats (page
127).
A
Memory pre-set buttonsB
Up to four different driver's seat and
exterior mirror positions can be
stored in the memory. Your preferred
setting for the reverse mirror dipping
feature can also be stored. See
Electric exterior mirrors (page
77).
Setting a memory pre-set
Passive setting
When this feature is enabled, the
vehicle stores the seating and mirror
positions for up to four remote
controls or passive keys. Next time
the vehicle is unlocked, the position
of the seat and mirrors will adjust to
the last used position. You can have
this function deactivated, see your
dealer.
Each time you turn the ignition off,
the current seat and mirror settings
are stored on the remote control or
passive key used.
Active setting
1. Turn the ignition on.
2. Adjust the seat and exterior
mirrors to the desired position.
3. Press and hold the desired
pre-set button B until a single
chime sounds to confirm.
Easy entry easy exit
To allow the driver to enter and exit
the vehicle with ease, the driver's
seat will automatically:
•
Move back after you perform a
recall with the remote control or
passive key.
•
Move back after the driver's door
is opened, unless the engine is
running.
•
Move to the driving position
(linked to the key used to recall)
after closing the driver's door and
switching the ignition on or a
passive key is recognised within
the vehicle.
You can have this function
deactivated, see your dealer.
143
Convenience features
To Next Page
Loading...
