1. Fold the third row seats flat. See
Rear seats (page 129).
2. Insert one end of each rod into
the retainers in the luggage
compartment trim panel.
3. Push the other end of each rod
toward its centre and insert the
rod into the retainer in the
opposite trim panel.
Note:
The upper rod ends can be
inserted into either the top or front
retainer in the trim panels.
Note:
On S-MAX the lower net
incorporates three storage
compartments. Make sure that the
net is positioned so that the storage
compartments face towards the rear.
LUGGAGE COVERS
WARNING
Do not place objects on the
luggage cover.
Pull out the cover and secure it in the
retaining points.
Release it from the retaining points
and let it roll back into the case. Clip
the retaining hook onto the case.
To remove or install the cover, push
either end of the case inwards.
188
Load carrying
To Next Page
Loading...
