CAUTION
Use only the specified jacking
points. If you use other positions,
you may damage the body, steering,
suspension, engine, braking system
or the fuel lines.
Note:
Use a jack with a minimum
lifting capacity of 1.5 tonnes and a
lifting plate with a minimum diameter
of 80 millimetres (3.1 inches).
Indentations in the sills A show the
location of the jacking points.
Vehicles with side skirts
Place the lifting plate through the cut
out on the underside of the skirt.
Removing a road wheel
WARNINGS
Park your vehicle in such a
position that neither the traffic
nor you are hindered or endangered.
Set up a warning triangle.
Make sure that the vehicle is on
firm, level ground with the
wheels pointing straight ahead.
Switch off the ignition and apply
the parking brake.
If your vehicle has a manual
transmission, select first or
reverse gear. If it has an automatic
transmission, select park.
Have the passengers leave the
vehicle.
240
Wheels and tyres
To Next Page
Loading...
