WHAT IS THE KEYLESS ENTRY
KEYPAD
The keyless entry keypad allows you to
lock and unlock your vehicle using the
keypad on the window trim.
KEYLESS ENTRY KEYPAD
LIMITATIONS
The system may not function if:
• The vehicle battery has no charge.
LOCATING THE KEYLESS
ENTRY KEYPAD
The keypad is near the driver window and
illuminates when you touch it.
KEYLESS ENTRY KEYPAD
MASTER ACCESS CODE
What is the Master Access Code
The master access code is a factory-set
five-digit entry code. You can operate the
keypad with the master access code at
any time. The master access code can be
displayed in the instrument cluster display
and is available from an authorized dealer.
Displaying the Master Access Code
in the Instrument Cluster Display
Read and understand the following before
you begin the process.
• You must have two previously
programmed remote controls inside
your vehicle.
• Make sure that your vehicle is off.
• Make sure that you close all the doors
and that they remain closed
throughout the procedure.
Perform all steps within 30 seconds of
starting the sequence. If you perform any
of the steps out of sequence, stop and wait
for at least one minute before starting
again.
Note: Do not place the device on the
wireless accessory charging area during the
procedure.
1. Access the backup slot. See
Accessing the Passive Key Backup
Position (page 209).
2. Place the first intelligent access key
into the backup slot.
3. Press the push button ignition switch
once and wait for a few seconds.
4. Press the push button ignition switch
again and remove the intelligent access
key from the center console.
5. Insert the second programmed key into
the backup slot in the center console,
then press the push button ignition
switch.
The factory-set code appears in the
instrument cluster display for a few
seconds.
Note: The code may not display until after
any other warning messages display.
87
2023 Super Duty (TFH) Canada/United States of America, enUSA, Edition date: 202211, DOM
Keyless Entry Keypad
To Next Page
Loading...
