We recommend first selecting the lumbar to the desired setting and then
selecting the back or cushion massage setting.
MEMORY FUNCTION (if equipped)
The memory control, located on the side seat panel, allows positioning
recall of the:
• driver seat.
• power mirrors.
• adjustable pedals (if equipped).
• power tilt/telescopic steering column (if equipped).
A. Type 1
B. Type 2
Programming a memory position
Note: A memory position may be programmed at any time.
• To program a position, move the memory features to the desired
positions using the associated controls. Press and hold the desired
memory button for at least two seconds. A chime will sound
confirming that a memory position has been set.
• To program another position, repeat the previous procedure using the
other buttons.
A B
168 Seats
2013 Taurus
Owners Guide gf, 3rd Printing, December 2012
USA (fus)
To Next Page
Loading...
