1. CRUISE CONTROL
To set your cruise
control speed:
a) Press the ON control
up and release.
b) Accelerate to the
desired speed.
c) Press the SET control
up and release, then
take your foot o the
accelerator. Aer you
set your speed, you
can press SET +/� to
adjust cruise speed.
To disable, press the
OFF control down.
ADAPTIVE CRUISE
CONTROL*
Allows you to set a
‘gap distance’ between
yourself and the vehicle
in front of you during
highway driving. When
your cruise control is
active, press GAP up
or down to select the
gap distance. Four gap
distance settings are
available. Refer to the
Cruise Control chapter
of your Owner’s Manual
for more information.
2. POWER TILT/
TELESCOPE STEERING
COLUMN*/
ADJUSTABLE PEDALS*
Two separate controls
allow you to tilt/telescope
the steering column, and
adjust the accelerator
and brake pedals to
the desired position.
3. LEFT VEHICLE
INFORMATION
DISPLAY*
Use the le-hand, 5-way
controls located on your
steering wheel to scroll
through information
such as fuel usage, trip
odometer, trip timer and
other features. You can
also personalize various
vehicle settings to match
your preferences. Refer
to the Information
Displays chapter of your
Owner’s Manual for
more information.
4. SERVICE ENGINE
SOON LIGHT
Lights briefly when
you switch on the
ignition. If it remains on
or is blinking aer you
started the engine, the
On-Board Diagnostics
(OBD-II) system has
detected a malfunction.
Drive in a moderate
fashion and contact
your authorized dealer
as soon as possible.
5. STEERING WHEEL
CONTROLS
Press VOL +/� to
increase/decrease
volume levels. Press
SEEK
to access
the next/previous radio
station preset, CD track
or preset satellite
radio channel*.
Press
to access
SYNC
®
phone features.
Press
to access
voice recognition.
6. RIGHT VEHICLE
INFORMATION
DISPLAY*
Displays information
about Entertainment,
Phone and Navigation*.
Use the right-hand,
5-way controls located
on your steering wheel
to scroll through,
highlight and make
minor adjustments
within a selected menu.
Refer to the MyFord
Touch
®
chapter in your
Owner’s Manual for
more information.
7. PUSH-BUTTON START*
Allows you to start your
vehicle by fully pressing
down on the brake pedal
and pressing the ENGINE
START/STOP button.
Press the button again
to switch o the engine.
Note: Your intelligent
access transmitter must
be inside the vehicle for
the ignition to start.
8. HAZARD CONTROL
INSTRUMENT
PANEL
2
3
7
4
6
2014 TAURUS /QUICK REFERENCE GUIDE /54/2014 TAURUS /QUICK REFERENCE GUIDE
*if equipped
5
1
8