8 / QUICK REFERENCE GUIDE 2017 TAURUS / 9
A revolutionary way to connect with your vehicle.
GETTING STARTED, UNDERSTANDING SYNC 3
Use the touchscreen to explore and interact with
your vehicle. The touchscreen works the same way
traditional controls, knobs and buttons do. Press the
various areas on your touchscreen to personalize the
many features and settings of your vehicle all in one
place. The system provides easy interaction with your
audio, climate, phone, navigation*, apps and settings.
Pairing Your Cell Phone with SYNC 3
Pair your phone to SYNC 3 before use. Make sure
that your vehicle is in park (P) and you switch on
your ignition.
1) Follow the on-screen instructions.
2) A prompt alerts you to search for the system on
your phone.
3) Select your vehicle’s make and model as it displays
on your phone.
4) Confirm that the six-digit number appearing on
your phone matches the six-digit number on
the touchscreen.
5) The touchscreen indicates when the pairing
is successful.
6) Your phone may prompt you to give the system
permission to access information. To check your
phone’s compatibility, see your phone’s manual or
visit the website.
SYNC
®
3
*
PHONE
Aer pairing your phone,
you can access more phone-
dependent features:
• Recent call list.
• Contacts: Sort alphabetically and
choose a specific letter to begin
viewing your entries.
• Phone settings: Pair another
device, and set ring tones
and alerts.
• Text messages.
• Do not disturb: Send all calls to
your voice mail, and set all ring
tones and alerts to silent mode.
Note: Use the voice commands to
make calls. Say “Call James at home”
or “Dial 555-1212”. You can use the
touchscreen to place calls as well.
Refer to the SYNC 3 chapter of your
Owner’s Manual for complete details.
NAVIGATION*
Press the Navigation* icon to
set your destination. Select one of
two ways to find your destination:
• Destination mode lets you key in a
specific address or use a variety of
search methods to locate where
you want to go.
• Map mode shows advanced
viewing of 2D city maps, 3D
landmarks and 3D city models
(when available).
Refer to the SYNC 3 chapter of your
Owner’s Manual for details.
Set a Destination
Press Destination on your touchscreen
and then press Search. Enter a street
address, intersection, city or a point of
interest (POI).
You can also use voice commands.
Say “Find a point of interest” and then
select a category, such as hotels or
restaurants.
Aer you choose your destination,
press Start. The system uses a variety
of screens and visible prompts to
guide you to your destination.
The navigation map shows your
estimated time of arrival, remaining
travel time or the distance to
your destination.
Navigation Menu
During active navigation, touch the
bottom of the screen to view the
menu, and then select Screen View.
• Full Map.
• Highway Exit Info displays on the
right side of the touchscreen. View
POI icons (such as restaurants
and ATMs) as they pertain to
each exit. You can select a POI
as a waypoint, if you wish.
Turn List shows all of the available
turns on your current route.
Trac List displays SiriusXM Trac
and Travel Link* information.
*if equipped *if equipped
To Next Page
Loading...
