Specifications
Only use fluid that meets Ford
specifications. Use oil and fluids that meet
the defined specification and viscosity
grades.
Note:
Use of other fluids may lead to
damage which is not covered by the
vehicle
Warranty.
Materials
SpecificationName
WSS-M2C913-DEngine Oil - SAE 5W-30
WSS-M97B44-DAntifreeze
Automatic Transmission Fluid
PN-3H
WSS-M6C65-A2Brake Fluid
Capacities and Specifications
Note:
Do not use more than 1 L of the
alternative engine oil between scheduled
service intervals.
If you are unable to find an engine oil that
meets the specification defined by WSS-
M2C913-D, it is acceptable to use a WSS-
M2C217-A1 OR WSS-M2C946-B1.
If you do not use oil and fluid that meets
the defined specification and viscosity
grade, it could result in:
• Component damage which may not be
covered by the vehicle Warranty.
• Longer engine cranking periods.
• Increased emission levels.
• Reduced engine performance.
• Reduced fuel economy.
• Reduced brake performance.
168
Territory (CF4) Philippines, Vehicles Built From: 25-05-2020, EN, First Printing
To Next Page
Loading...
