HEADLAMP LEVELING
Push the lever up or down to use the
direction indicators.
Note:
Tap the lever up or down to make
the
direction indicators flash three times
to
indicate a lane change.
You can adjust the level of the headlamp
beams according to the vehicle load. Turn
the thumbwheel downward to lower the
beams and upward to raise them
INTERIOR LAMPS
The lamps turn on under the following
conditions:
• You open any door.
• You press a remote-control button.
• You press button A on the front interior
lamp.
Front Interior Lamps
Note:
Set the control to zero when your
vehicle is unloaded.
Note
: Set the headlamp beams to give
between 35–100 m of road surface
illumination when your vehicle is partially
or fully loaded.
DIRECTION INDICATORS
Lighting
Note:
The front interior lamp switches are
on the overhead console. The exact
location
of each button on the overhead
console
depends upon your vehicle
features.
Note:
Press the button to switch the door
function off when you open any door.
When
the door function is off and you
open a door,
the courtesy and door lamps
stay off.
The
indicator lamp lights amber
when the door
function is off.
Note:
Press the button again to switch
the
door function back on.
When the door
function is on and you open a door,
the
courtesy and door lamps turn on.
The
indicator lamp lights blue when the door
function is on.
A Individual map lamps
B All lamps on / off
C Door function
B
A
C
A
44
Territory (CF4) Philippines, Vehicles Built From: 25-05-2020, EN, First Printing
To Next Page
Loading...
