Parking Aids (If Equipped)
Activate AVM System
1. When the vehicle is in reverse and
the speed is less than 20 km/h, the
AVM system will be activated.
2. When the vehicle is not in reverse
and the speed is less than 20 km/h,
the AVM system can be activated
via the AVM activation switch on
the 360° camera settings screen in
TOUCH screen.
Deactivate AVM System
1. With the AVM system on, in case of
a speed over 20 km/h in reverse, it
will be deactivated.
2. With the AVM system on, in case
speed is over 20 km/h not in
reverse, it will be deactivated.
3. With the AVM system on, in case
speed is less than 20 km/h not in
reverse, it will be deactivated after
the corresponding button is
pressed.
4. With the AVM system on, in case
of overspeed, it will be deactivated.
it will be re-activated after the
speed reaches less than 20 km/h.
2D/3D switch, usually hidden and
displayed when the screen is touched.
View switch, usually hidden and
displayed when the screen is touched.
2D/3D Switch
T
ouch the central control screen and
click on the 2D/3D switch to change
the mode.
In reverse, only 2D rear view mode is
displayed.
After the AVM system is activated, the
central control screen will display the
system interface in left and right sub-
screens, depending on the 2D/3D
mode.
AVM Interface Layout
1. Mode
2. Interface display
2D View
3D View
1 2
2D
2D Small Picture Area
2D Panoramic Display Area
Front
Rear
Le
Right
1 2
3D
3D Small Picture Area
3D Panoramic Display Area
Rear
Right
Rear
Le
Front Front
Front
Rear
Le
Le
Right
Right
92
Territory (CF4) Philippines, Vehicles Built From: 25-05-2020, EN, First Printing