EasyManua.ls Logo

Ford TOURNEO CONNECT 2015 - Removing the Wheel Trim; Lowering the Spare Wheel; Removing a Road Wheel

Ford TOURNEO CONNECT 2015
302 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Note: You can use the wheel brace to raise
and lower the jack.
Lowering the Spare Wheel
1. Insert the hexagonal end of the wheel
brace into the guide hole.
2. Turn the wheel brace counterclockwise
until the spare wheel rests on the
ground and there is slack in the cable.
3. Unscrew the cap and slide it back, turn
the nipple of the cable through 90
degrees to remove the first cable.
4. Unscrew the nut to remove the second
cable.
Removing the Wheel Trim
1. Insert the wheel brace and carefully
remove the wheel trim.
Note: Make sure that you pull the wheel
trim remover at right angles to the trim.
Removing a Road Wheel
WARNINGS
Park your vehicle in such a position
that neither the traffic nor you are
hindered or endangered.
195
Tourneo Connect (CHC) Vehicles Built From: 10-03-2014, Vehicles Built Up To: 31-12-2014, Long Wheelbase Kombi/Short Wheelbase Kombi, Base/Base High Payload/Titanium/Titanium High Payload/Trend/Trend ECOlite/Trend High Payload, CG3588en enGBR, Edition date: 02/2014, None
Wheels and Tires

Table of Contents

Related product manuals