Removing and installing front
hea
d restraints
Please refer to and at the start
of the chapt
er on page 106.
Fig. 81 On the b
ack of the front seat back-
rest: Removing the head restraint
Removing the front head restraints
1. Lower the head restraint if necessary
→ page 107.
2. To unlock the head restraint, feel for the
recess in the marked area on the rear of
the backrest and use a finger to press it
in the direction of the arrow
→ Fig. 81
1 .
3.
For seats with a stowage area in the
backrest, press the recess by pushing
a long object through the hole in the
upper part under the rubber strap on
the stowage area →
.
4
. Pull the head restraint out fully in the
direction of the arrow → Fig. 81
2 .
Fit
ting the front head restraints
1. Position the head restraint correctly
over the head restraint guides and then
insert into the guides of the corre-
sponding seat backrest.
2. Slide the head restraint all the way
down until the guide pins click into
place.
3. Adjust the head restraint so a correct
sitting position can be assumed.
NOTICE
Sharp objects can damage the seat cush-
ion and scra
tch the stowage area in the
backrest.
·
Always use a blunt object to remove the
head restraint in vehicles with a stowage
area in the backrest.
Ask a qualified workshop to remove
and install the hea
d restraints in the
first row of seats.
Removing and installing the rear
head restraints
Please refer to and at the start
of the chapt
er on page 106.
Fig. 82 S
econd row of seats: removing the
head restraint.
Fig. 83 T
hird row of seats: removing the
head restraint.
108 Seats and head restraints
To Next Page
Loading...
