ates only within the limits of the system.
P
ro Trailer Backup Assist provides support
when manoeuvring a trailer and does not
detect any obstacles in the area around the
vehicle. In rare cases, the trailer may move
dierently than set. If you do not pay due
attention, there is a risk of accidents and
serious injuries.
·
Always pay due attention and do not rely
exclusively on the system. The driver is
always responsible for all driving tasks.
·
Always pay close attention to the move-
ments of the trailer and cancel the ma-
noeuvre yourself if necessary.
·
Do not rely solely on the instrument clus-
ter displays.
·
Use the foot brake to slow the vehicle in
good time when an obstacle is encoun-
tered.
For technical reasons, Pro Trailer
Ba
ckup Assist cannot always detect
trailers with an LED tail lamp cluster cor-
rectly.
Manoeuvring the vehicle and trail-
er
Please refer to at the start of the
chapt
er on page 212.
Switching on
1. Stop the vehicle.
2. Select reverse gear.
3. Tap the
function button in the Info-
tainment system.
4
. Tap the
function button.
The symbol will light up if the func-
tion is active.
5. Tap .
T
he manoeuvring operation can be
started.
Fig. 137 On the instrument cluster displa
y:
adjusting the angle of the trailer using the ro-
tary knob for the exterior mirrors.
Fig. 138 On the instrument cluster displa
y:
adjusting the direction of travel of the trailer.
Rotary knob for adjusting the exterior
mirror position.
Align the trailer to the le.
Align the trailer to the right.
Reverse the vehicle and move the
trailer towards the target position.
Current trailer position.
Target trailer position.
Zero position on the angle display.
1. Check whether the requirements for
Pro Trailer Backup Assist are met
→ page 212.
2. Release the steering wheel →
.
3.
Tilt the rotary knob in the driver door
until the desired direction is reached
→ Fig. 137
1 .
1
2
3
4
5
6
7
Pro Trailer Backup Assist
213
2KF012720AE
To Next Page
Loading...
