Symbol Meaning
Speed regulation due to
a right-hand bend
→ pa
ge 174
Speed regulation due to
a junc
tion → page 173
Speed regulation due to
a roundabout → pa
ge 174
Take foot o a
ccelerator
→ page 173
Motorway exit ahead
→ pa
ge 174
Downhill gradient ahead
→ pa
ge 174
Speed limit ahead, example
→ pa
ge 172, → page 174
Vehicle in front → pa
ge 173
Steering wheel heating
→ pa
ge 131
Area View rear → pa
ge 206
Area View rear crossing tra
c
→ page 206
Mobile telephone connected
via Bluetooth® → pa
ge 26,
→ page 30
Area View trailer support view
→ pa
ge 206, → page 207
Warning and information
messa
ges
The system runs a check on certain compo-
nents and functions in the vehicle when the
ignition is switched on or while the vehicle
is in motion. Malfunctions are indicated by
red and yellow warning symbols with infor-
mation messages on the instrument cluster
display. An acoustic warning is also given in
certain cases. What the information mes-
sages and symbols look like can vary de-
pending on the version of the instrument
cluster.
In addition, a list of current malfunctions
can be opened manually. To do so, open
the V
ehicle status or Vehicle menu
→ page 34.
Priority 1 warning message
The red central warning lamp fla
shes or
lights up, in some cases together with
acoustic warnings or additional symbols.
Do not drive on! D
anger. Check the fault
and correct the cause. If necessary, seek
assistance from a suitably qualified work-
shop.
Priority 2 warning message
The yellow central warning lamp fla
shes or
lights up, in some cases together with
acoustic warnings or additional symbols.
Malfunctions and insucient service fluids
can damage the vehicle and cause it to
break down. Check the fault as soon as
possible. If necessary, seek assistance from
a suitably qualified workshop.
Reference to information in the
Owner
’s Manual
You can find further informa
tion on the
warning message in the Owner’s Manual.
Information message
Information about various procedures with-
in the vehicle.
If several warning reports are detec-
ted, the symbols will appear for sever-
al seconds, one aer another. The symbols
will continue to appear until the faults are
rectified.
If warning messages about malfunc-
tions are displayed when the ignition
is switched on, it may not be possible to
adjust some settings or display information
as described. If the fault persists, go to
a suitably qualified workshop.
Introduction to instrument
cl
uster
The vehicle is fitted with a digital instru-
ment cluster. The instrument cluster indi-
cates basic information, such as speed.
Warning and information messages 21
2KF012720AE