The following Bluetooth® profiles ma
y be
available in the specified or a newer ver-
sion:
— HFP 1.7.
— Telephony and hands-free.
— A2DP 1.3/AVRCP 1.6.
— Music playback.
— Displaying and operating music play-
back.
— Transmission of Cover Arts.
— PBAP 1.2./MAP 1.4.
— Access to phone book and call lists.
— Access to SMS and email.
Prerequisites for using the Bluetooth®
interface for music playback
✓ The mobile device supports the Blue-
tooth® profile Advanced Audio Distri-
bution Profile (A2DP).
✓ Permission for audio and media trans-
mission to the Infotainment system
must be given in the settings on the
mobile device.
With mobile devices that support the
A
VRCP Bluetooth® profile, playback
on the mobile device can be automatically
started or stopped upon switching to Blue-
tooth® audio mode or to a dierent audio
source.
You can find more detailed information on
using a mobile device for music playback in
this owner’s manual.
Pairing a mobile device with the vehicle
via Bluetooth®
1. Open the app overview and tap
Network Mobil
e devices
.
2.
Tap and activate Bluetooth.
3. Tap and activate Visibility.
4. Open the list of available Bluetooth®
devices on the mobile device and select
the device name of the Infotainment
system.
5. Observe the messages on the mobile
device and Infotainment system and
confirm as necessary.
If pairing was successful, the data of
the mobile devic
e will be stored in the
user profile.
6. Optional: confirm message for data
transfer on the mobile device.
As a general rule, it is only necessary
to pair a mobile device, e.g. a mobile
telephone, once. You can then reconnect
the device to the Infotainment system via
Bluetooth® at any time without having to
pair the device again.
The extent to which the Infotainment
system can be used to control the
mobile device connected via Bluetooth®
depends on the respective mobile device.
You can find more detailed informa-
tion on using a mobile device via
a Bluetooth® connection in this owner’s
manual.
Always switch o the warning and
service tones on a connected mobile
device (e.g. key tones on a mobile tele-
phone) to prevent interference noise and
malfunctions.
Connecting an external audio
sour
ce via Wi-Fi
Please refer to at the start of the
chapt
er on page 261.
The Wi-Fi connection is a wireless connec-
tion.
In Wi-Fi audio mode, sources connected via
Wi-Fi. e.g. mobile telephones, can be used
for audio transmission.
The Wi-Fi function depends on the vehicle
equipment and is only available in some
countries.
Prerequisites
✓ T
he connected audio source has a suit-
able application (app) or supports
UPnP media sharing.
✓ The audio source is connected via Wi-
Fi.
Wired and wireless connections 263
2KF012720AE
To Next Page
Loading...
