Connecting a mobile telephone
with Mobil
e Apps
Please refer to and on page 232
and at the start of the chapter on
page 266.
The mobile telephone needs to be paired
with the Infotainment system before you
can use Mobile Apps or Mobile Apps Wire-
less. With Mobile Apps Wireless, the con-
nection is started via Bluetooth® and is
then set up via the Wi-Fi hotspot of the In-
fotainment system.
If Apple CarPlay is used, the Blue-
tooth® connection is terminated
again as soon as the connection via the Wi-
Fi hotspot of the Infotainment system has
been established.
If Android Auto is used, the Bluetooth®
connection is maintained.
Connecting a mobile telephone via USB
cable
1. For Mobile Apps, connect the mobile
telephone with the Infotainment sys-
tem using a USB cable.
2. Confirm any authorisation prompts on
the mobile telephone to give the Info-
tainment system the necessary permis-
sions.
Mobile Apps is now set up.
Connecting a mobile telephone for Mo-
bile Apps Wireless
1. For Mobile Apps Wireless, connect the
mobile telephone using Bluetooth®
→ pa
ge 261.
2. Open the app overview and tap
.
3.
Select the mobile telephone and the re-
quired technology.
4. Confirm any authorisation prompts on
the mobile telephone to give the Info-
tainment system the necessary permis-
sions.
Mobile Apps Wireless is now set up.
Mobile Apps or Mobile Apps Wireless will
not be available if you do not confirm the
pop-up menus during the connection proc-
ess. In this case, we recommend deleting
the mobile telephones in both the device
settings and on the Infotainment system
and restarting the c
onnection process.
Apple CarPlay™
Please refer to and on page 232
and
at the start of the chapter on
pa
ge 266.
Prerequisites
The following conditions must be fulfilled
in order to use Apple CarPlay:
✓ The iPhone must support Apple Car-
Play.
✓ The voice assistant (Siri) must be acti-
vated on the iPhone.
✓ Apple CarPlay must be activated in the
iPhone settings without any restric-
tions.
✓ For wireless use of Apple CarPlay Wire-
less, Bluetooth® and the Infotainment
system as a Wi-Fi hotspot must be acti-
vated on the iPhone.
✓ If Apple CarPlay Wireless is not possi-
ble, the iPhone must be connected to
the Infotainment system via a USB con-
nection with data transfer capability.
Only USB ports with data transfer ca-
pability are suitable for using Ap-
ple CarPlay.
✓ The USB cable used must be an original
cable from Apple.
The availability of the technologies is
c
ountry-specific and may vary.
Information on technical require-
ments, compatible iPhones, certified
apps and availability are available on the
Ford and Apple CarPlay websites or from
an authorised dealer.
Opening Apple CarPlay
1. To start Apple CarPlay, tap Mobile
Apps.
Terminating the connection
The display of the function buttons on the
screen may vary.
268 Infotainment system
To Next Page
Loading...
