Fitting the load compartment cover
1. Position the load compartment cover in
the le mounting in the side trim.
2. Pull and hold the catch of the load
compartment cover in the direction of
the arrow → Fig. 150 B .
3.
Press the load compartment cover
down in the right-hand mounting.
4. Release the load compartment cover
catch.
5. Check that the load compartment cov-
er is engaged securely.
WARNING
The installed load compartment cover in
front of the third sea
t row can cause seri-
ous injuries in the event of a sudden brak-
ing manoeuvre or accident.
·
Do not install the load compartment
cover if there are people in the third row
rear seats.
WARNING
Objects or animals on the load compart-
ment c
over could cause serious injuries in
the event of a sudden driving or braking
manoeuvre or in an accident.
·
Never transport any objects on the load
compartment cover.
·
Never transport any animals on the
load compartment cover.
Net partition
Installing and removing the net
partition
Using the net partition behind the front
seats
Fig. 151 Behind the first sea
t row: Fitted net
partition.
Fig. 152 Behind the folded-down sec
ond
seat row: Fitted net partition.
Installing
1. If necessary, fold down or remove the
second seat row.
2. Hook the net partition into the front le
holder → Fig. 151
A or → Fig. 152 A in
the roof. Ensure that the transverse rod
is pulled up over the upper position so
that it latches securely in the slots.
3. Hook the net partition into the front
right holder in the roof.
274 Transporting items
To Next Page
Loading...
