3. Unhook the net partition from the right
holder in the roof.
4
. Unhook the net partition from the le
holder in the roof.
WARNING
In the event of a sudden braking manoeu-
vre or a
ccident, objects could be flung
through the interior of the vehicle and
lead to severe or fatal injuries.
·
Check that the net partition is not dam-
aged.
·
Never use a damaged net partition.
·
Adjust all backrests in front of the net
partition so that they are upright and
engaged in position.
·
Ensure that the rods are securely en-
gaged.
·
Check to make sure that the net parti-
tion is tensioned at regular intervals.
·
Additionally secure all objects in the
load compartment even when the net
partition is installed.
·
Make sure that there are no persons be-
hind the fitted net partition when the
vehicle is in motion.
NOTICE
If the net partition is not secured at the
mounting points provided for this purpose,
this may result in damage.
·
Always secure the net partition only to
the designated mounting points.
Adjustable partition
T
he partition can prevent objects in the
load compartment entering the passenger
compartment.
The partition can be fitted behind the front
seats or behind the second row of seats.
Fig. 155 In the loa
d compartment: fitting the
adjustable partition behind the second row of
seats.
Fig. 156 In the loa
d compartment: lower an-
chor point.
1
Partition roller.
2
Recess in the anchor point.
Fitting the partition behind the second
r
ow of seats
When using the partition behind the second
row of seats, the seats in the second row
must not be removed or folded down →
.
1.
Fold seats in the second row forward.
2. Push the bottom of the adjustable par-
tition on the roller → Fig. 156
1 into the
rear depression in the anchor point 2 .
3.
Bolt the adjustable partition to the rear
fastening points in the roof → Fig. 155.
4. Bolt the adjustable partition to the low-
er anchor points → Fig. 155.
276
Transporting items
To Next Page
Loading...
