Engine code
1. Open the Service menu → page 32.
2. Select the Engine code menu option.
Selector lever position for automatic
transmission
The selected position and, depending on
driving profile, the selected gear are dis-
played both on the selector lever and in the
digital instrument cluster. The gear shi
pattern is displayed in the instrument clus-
ter when the brake is pressed or the selec-
tor lever operated → page 151.
Possible secondary displays in the digi-
tal instrument cluster
Depending on equipment, a configuration
menu can be used to configure and display
additional views in the secondary display of
the digital instrument cluster → page 22:
— Operating temperatures.
— Driving data displays, e.g. Driving time/
Distance covered.
— Compass display.
— Charge pressure.
— Power.
— Selective wheel torque control.
— Navigation information.
— Telephone information.
— Destination information.
Operating temperatures
The following operating temperatures may
be displayed, depending on the vehicle
equipment:
— Engine oil.
— Coolant.
— Gearbox.
Compass display
If the Compass secondary display is activa-
ted, the current compass direction in which
you are driving is shown as a blue arrow
with a representa
tion of the vehicle in com-
bination with a compass.
Selective wheel torque control
The secondary display Torque distribution
shows the currently present torque individ-
ually for each wheel.
Navigation information
When route guidance is active, the direction
of travel is displayed in the Navigation in-
formation secondary display by an arrow
symbol.
The submenu contains the home address
and a list of recent destinations. You can
start route guidance using the
button
→ pa
ge 248.
Telephone
If the Telephone secondary display is acti-
vated and a mobile telephone is connected
via Bluetooth®, for example, the Bluetooth
symbol is shown in the digital instrument
cluster display
. In addition, the symbol
shows the charge level of the mobile phone
b
attery
The submenu contains a list of the most re-
cent calls and permits the displayed con-
tacts to be called back.
Destination information
When route guidance is active, the Desti-
nation information secondary display
shows the expected journey time and the
distance to the destination in km or miles.
Some displays on the digital instru-
ment cluster may be overridden by
sudden events such as incoming telephone
calls.
Depending on the vehicle equipment
level, some settings and displays may
also appear in the Infotainment system.
26 Driver information
To Next Page
Loading...
