Ford TOURNEO CONNECT - Installing a Road Wheel

6. Remove the wheel nuts and the
wheel.
Installing a road wheel
WARNING
Use only approved wheel and
tyre sizes. Using other sizes
could damage the vehicle and will
make the National Type Approval
invalid. See Technical
specifications (page 124).
CAUTION
Do not install alloy wheels using
wheel nuts designed for use with
steel wheels.
Note: Make sure the wheel and hub
contact surfaces are free from
foreign matter.
Note: Make sure that the cones on
the wheel nuts are against the wheel.
1. Install the wheel.
2. Install the wheel nuts finger tight.
E76138
3. Install the locking wheel nut key.
1
2
3
4
5
E75442
4. Partially tighten the wheel nuts in
the sequence shown.
5. Lower the vehicle and remove the
jack.
6. Fully tighten the wheel nuts in the
sequence shown.
122
Wheels and tyres