CHANGING A BULB
WARNINGS
Switch the lights and the ignition
off.
Let the bulb cool down before
removing it.
CAUTIONS
Do not touch the glass of the
bulb.
Only fit bulbs of the correct
specification. See Bulb
specification chart (page 45).
Note:
When replacing a bulb, clean
the headlamp lens with a damp cloth
to avoid any electrostatic charging,
which attracts dust to the plastic lens.
Note:
The following instructions
describe how to remove the bulbs.
Fit replacements in the reverse order
unless otherwise stated.
Headlamp
Direction indicator
1. Turn the bulb holder
anti-clockwise and remove it.
2. Gently press the bulb into the bulb
holder, turn it anti-clockwise and
remove it.
Headlamp main and dipped
beam
Note:
When installing the cover,
make sure the arrow faces up.
41
Lighting
To Next Page
Loading...
