Ford TOURNEO CONNECT - Views in the display area; Selecting a menu or information display; Adjusting settings in menus

Vehicles without multifunction steering
whe
el: If any priority 1 warning reports are
being displayed, you will be unable to open
any menus. Some warnings can be con-
firmed and hidden with the
button
→ Fig. 11 1 .
V
iews in the display area
The main display can be changed by press-
ing the
→ Fig. 10 button. T
he following
views can be shown in the display area:
Aer the engine is switched o:
display with information on the vehi-
cle status, e.g. mileage.
Display with digital speed display.
Classic display of round instru-
ments.
Navigation map and route
guidance information.
Display of active
driver assist systems.
Alternative displays, e.g. sport dis-
plays, can be shown here, depending
on equipment.
Situation-dependent information, e.g.
navigation information, is displayed as
pop-ups.
Selecting a menu or information dis-
play
Vehicles with multifunction steering wheel:
1. Switch on the ignition.
2. Press the
→ Fig. 10 button, several
times if required, if a messa
ge or the ve-
hicle pictogram is displayed.
3. Press the
→ Fig. 10 or → Fig. 10
button to displa
y the menus and to
browse through a menu.
4. To open the menu or information dis-
play shown, press the
button
→ Fig. 10 or wait until the menu or infor-
ma
tion display opens automatically af-
ter a few seconds.
Vehicles without multifunction steering
wheel:
1. Switch on the ignition.
2.
Press the
→ Fig. 11 1 button,
several times if required, if a messa
ge
or the vehicle pictogram is displayed.
Summary
Basic
Classic
Navigation
Driver assist systems
Special
3.
Hold down the → Fig. 11 2 rocker
switch to displa
y the menus
→ page 23 or to return to the menu se-
lection from a menu or an information
display.
4. Press the rocker switch at the top or
bottom to scroll through the menus.
5. To open the menu or information dis-
play shown, press the
but-
ton → Fig. 11 1 or wait until the menu or
informa
tion display opens automatical-
ly aer a few seconds.
Selecting secondary displays
The secondary displays can be configured
or hidden independently of each other. Var-
ious driving data, navigation information or
information on audio playback or the mo-
bile phone interface can be shown in the
secondary displays.
1. Select the right or le secondary dis-
play area with the
→ Fig. 10 or
→ Fig. 10 buttons on the multifunc
tion
steering wheel.
2. Select the desired secondary display
with the
→ Fig. 10 or → Fig. 10 ar-
row buttons.
3. C
onfirm the selection with the
→ Fig. 10 button.
A
djusting settings in menus
Vehicles with multifunction steering wheel:
1. Press the
or arrow button in the
displa
yed menu until the desired menu
option is highlighted.
A frame appears around the selected
option.
2. Press the
button → Fig. 10 to make
the required changes.
A tick indicates that the relevant
func
tion is switched on.
Vehicles without multifunction steering
wheel:
1. In the displayed menu, press the rocker
switch
→ Fig. 10, → Fig. 10 a
t the
top or bottom until the desired menu
option is marked.
A frame appears around the selected
option.
22
Driver information