Ford TOURNEO CONNECT - Transporting items; Stowing loads; Stowing loads safely

2. Tap Apple CarPlay to set up a c
on-
nection with the iPhone.
Terminating the connection
1. To access the Mobile Apps main menu,
tap FORD in Apple CarPlay mode.
2. Tap
to terminate the active connec-
tion.
T
he display of the function buttons on the
screen may vary.
Things to note
Please note the following points during an
active Apple CarPlay connection:
— You cannot connect the iPhone to the In-
fotainment system via Bluetooth.
— An active Bluetooth connection is termi-
nated automatically.
— Telephone functions are possible only via
Apple CarPlay. The Infotainment system
functions described in this manual are
not available.
— The connected iPhone cannot be used as
a media device in the Media main menu.
— It is not possible to use the Apple Car-
Play navigation at the same time as the
internal navigation system. The last route
guidance to be started terminates the
previously active one.
— Depending on the Infotainment system,
the instrument cluster display may show
information about telephone mode.
— Depending on the Infotainment system
and navigation app you are using, turning
instructions may be shown on the instru-
ment cluster display.
— You can accept or reject incoming calls or
end a telephone call via the multifunc-
tion steering wheel.
Starting the voice control function
The “voice control” function depends on
the vehicle equipment level.
1. Tap
briefly to start voic
e control on
the Infotainment system.
Or: tap and hold
to start voice con-
trol (S
iri) on the connected iPhone.
The availability of the technologies is
country-specific and may vary.
Information on technical require-
ments, c
ompatible iPhones, certified
apps and availability are available on the
Ford and Apple CarPlay websites or from
an authorised dealer.
Android Auto
Please refer to and on page 219
and
and at the start of the chapter
on pa
ge 255.
Prerequisites for using Android Auto
✓ T
he mobile telephone – hereinaer re-
ferred to as a smartphone – must sup-
port Android Auto.
✓ An Android Auto app must be installed
on the smartphone.
✓ The smartphone must be connected to
the Infotainment system via a USB con-
nection with data transfer function. An-
droid Auto Wireless is an exception to
this.
✓ The USB cable used must be an original
cable from the smartphone manufac-
turer.
✓ Android Auto Wireless: in addition,
Bluetooth and Wi-Fi must be activated
on the smartphone.
Making a connection
Follow the instructions on the Infotainment
system screen and the display on the
smartphone when establishing a connec-
tion for the first time.
The prerequisites for using Android Auto
must be met.
1. Tap
HOME
Mobil
e Apps
.
2.
Tap
Android Auto to set up a c
on-
nection with the smartphone.
Terminating the connection
1. To open the Mobile Apps
main
menu, tap Ba
ck
or E
xit when in An-
droid Auto mode.
2. Tap
to terminate the active connec-
tion.
258 Infotainment system